Free Samsung Mobile Tricks & Tips

Samsung Reset Codes

  • You can try these in case you downloaded corrupted or incompatible Java midlets or other media, which are causing problems with the phone.

  • *2767*JAVA# Java Reset and (Deletes all Java Midlets)
  • *2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
  • *2767*WAP# Wap Reset
  • *2767*CUST# Reset Custom EEPR0M
  • *2767*FULL# Reset Full EEPR0M (Caution)
  • For example : *2767*JAVA# would be keyed in as *2767*5282#
  • Note : Not all codes will work with SGH-C100.

Other Samsung Codes

  • *#06# IMEI code
  • *#9998*4357# Help Menu
  • *#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
  • *#9999#0# Monitor Mode
  • *#9999# or *#9998*9999# Software Version
  • *#8888# or *#9998*8888# Hardware Version
  • *#9998*746# or *#9998*0746# or *#0746# Sim Infos
  • *#9998*523# or *#9998*0523# or *#0523# Display Contrast
  • *#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
  • *#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
  • *#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
  • *#9998*377# or *#9998*0377# Error log
  • *#9998*778# or *#9998*0778# or *#0778# Sim Service table
  • *#9998*782# show date and alarm clock
  • *#8999*638# show network information
  • *#9998*5646# change operator logo at startup
  • *#9998*76# production number
  • *#9998*968# view melody for alarm
  • *#9998*585# Non-Volatile Memory (NVM)
  • *#3243948# Digital Audio Interference Off
  • *#32436837# Digital Audio Interference On

SAMSUNG T100 SECRET CODES

  • *#06# IMEI code
  • *#9999# -> Show Software Version
  • *#0001# -> Show Serial Parameters
  • *2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it)

  • *2767*2878# -> Custom EEEPROM Reset
  • *#8999*228# -> Battery status (capacity, voltage, temperature)
  • *#8999*246# -> Program status
  • *#8999*289# -> Change Alarm Buzzer Frequency
  • *#8999*324# -> Debug screens
  • *#8999*364# -> Watchdog
  • *#8999*377# -> EEPROM Error Stack
  • *#8999*427# -> Trace Watchdog
  • *#8999*523# -> Change LCD contrast
  • *#8999*544# -> Jig detect
  • *#8999*636# -> Memory status
  • *#8999*746# -> SIM File Size
  • *#8999*778# -> SIM Service Table
  • *#8999*785# -> RTK (Run Time Kernel) errors
  • *#8999*786# -> Run, Last UP, Last DOWN
  • *#8999*837# -> Software Version
  • *#8999*842# -> Test Vibrator
  • *#8999*862# -> Vocoder Reg
  • *#8999*872# -> Diag
  • *#8999*947# -> Reset On Fatal Error
  • *#8999*999# -> Last/Chk
  • *#8999*9266# -> Yann debug screen (=Debug Screens?)
  • *#8999*9999# -> Software version

SAMSUNG V200 SECRET CODES

  • v200 Unlock Code-> *2767*7822573738#
  • *#9324# Netmon (press the hangup key to exit)
  • #9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
  • *#9998*Help# Help screen/ List of codes
  • *#9998*LOGO# Change operator Logo
  • *#9998*RTC# RTC Display
  • *#9998*Bat# Battery Status
  • *#9998*Buz# Turns Buzzer ON
  • *#9998*Vib# Turns Vibrator ON
  • *#9998*LCD# LCD Contrast
  • *#9998*9999# Softwre Version
  • *#9998*8888# Hardware Version
  • *#9998*377# NVM Error Log (?????)
  • *#9998*NET# SIM Network ID
  • *#9998*778# SIM Serv. Table
  • *#9998*SIM# SIM Info
  • *#9998*PN# Production No.
  • *#9998*968# Reminder Tune
  • *#9998*NVM# Displays Non-Volitile Memory Status
  • *#9999*C# ???????????????????
  • *#06# Displays phones I**I No.
  • ***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at own risk !!!
  • *#9998*2576# Forces SIM Error
  • *#9998*DEAD# Forces Phone Crash
  • *2767*MEDIA# Resets the medis on the phone (deletes all downloaded pics/tones)
  • *2767*FULL# Resets the EEPRON *DANGEROUS*
  • *2767*CUST# Resets the Custom EEPRON
  • *2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
  • *2767*STACKRESET# Resets Stack
  • *2767*225RESET# ????????????????? * Dangerous *
  • *2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

  • The universal unlock code is *2767*637# do this with out your sim in By default, the
  • firmware (software) for x600 only receives java apps and other applications like stuff by
  • serial port. but even for it, you have to enable the serial port, which also causes the closing
  • of all other ports, even the IrDA too :-( ..

  • well, guess what, i have very good news for you, do you know, you can increase the sound
  • level, the sound level for tones, speaker fone, etc, can be increase even then if it is at max
  • (level 4)
  • you still can do it, just follows the instructions!

  • **************** HERE WE GO **************
  • Enter the following code:
  • *#8999*8378#
    (You'll be shown menu, then ...)
  • then go to:
  • "H/W test"
  • then go to:
  • "Audio Settings"
  • then go to:
  • "Melody Gain"
  • There will you see a number. there are five (5) Melody Levels" of it. (and currently, you are
  • at level 1 and after pressing the "save" button, you will move to level 2 and so on .........................)
  • you have to change the values of all the levels. and as the resultant, it will give increase
  • the melody sound!, your tones will more louder, even more louder then the max. ringing
  • volume.
  • the level wise numbers are: (as its my setting :-) )
  • Melody Level 1: 13
  • Melody Level 2: 17
  • Melody Level 3: 18
  • Melody Level 4: 25
  • Melody Level 5: 31
  • you even can make your own combinations of level wise sounding numbers that can
  • change the sound level!.
  • if your combination cause more louder sound level, then mine, then do share it with the
  • group! ... :-) meanwhile, try my figured-out combination!
  • ************ CAUTION ************
  • if anything goes wrong, then you can apply the master reset code, that will NOT delete
  • anything, ANYTHING from your cell fone, but set each and eveything to its
  • default/standard setting ... (likes, factory settings :-) )
  • the master reset code is:
  • #*7728#
  • #########################################
  • I take no responsibility of these codes are working or not, or its effects on your cell fone

  • but i have tried these codes on my cell fone. and i bet, nothing goes wrong, but even then

  • of my words, be carefull!,

  • #########################################
  • The code: *#8999*8378#
  • as i regarded it a informative code,
  • will tell you each and everything about your cell fone.
  • and in the "H/W test",
  • there are lot of other Audio settings,
  • each of them having five (5) levels,
  • you can change the combination, but before doing anything, do write the defult number
  • sequence to some place so that you'll be then able to invert it again! ..
  • :-) ... #*2558# -Time ON
  • #*2527# - GPRS Switching Set to class {4/8/9/10}
  • #*4263# - Handsfree Mode: ACTIVATED
  • #*53696# - [Java dnload] WAPSAR mode
  • #*536961# - WAPSAR enable HTTP disable
  • #*536962# - HTTP enable WAPSAR disable
  • #*536963# - SERIAL enable Others disable
  • #*5663351# - [Phone Model] SAMSUNG SGH-X100
  • #*6420# - Mic off #*6421# - Mic on
  • #*7632# - Sleep mode
  • *#8999*523# - Main LCD Brightness
  • *#8999*3825523# - (?) External display
  • *2767*3855# - Full EEPROM reset(Reset all type of locks)also you'll lose pictures and java
  • not melody
  • Remove camera sound:
  • On main screen type:
  • *#8999*8378# --> Test mode
  • H/W test
  • Audio Settings
  • Melody Gain
  • Then replace 6 by 0, it'll show 12 but it's OK
  • Press back until main screen
  • Then press key volume to minimum and let's try !!! no more sound
  • tip by C-Quest
  • *2767*688# resets the phone
  • Thats all!!!!!!!!!!!!!!!
Designed By Digital Solutions
Copyright 2002 - 2014 Muskurahat.com - All Rights Reserved.